For use with use with any hobby knife #1 handle this holder is essential as it holds the blades straight and stiffens them. This improves the cutting, it prolongs the life of the blade and prevents any possible injury by keeping fingers away from the sharp edges of the blade. The set contains one holder and two screws+nuts, which are all made entirely from stainless steel. Does not include the knife handle or blades.
RB Productions stainless steel saws have a great number of modeling uses. Four grades of saw are offered. All four are presented in robust but admirably thin stainless steel. The four grades are:
RBR-14 - Rapid Cut Saw Blade (12 teeth per cm)
RBR-15 - Medium Saw Blade (16 teeth per cm)
RBR-16 - Fine Saw Blade (24 teeth per cm)
RBR-17 - Rapid Cut Saw Blade (48 teeth per cm)
The coarsest of these blades is perfect for making fast cuts and removing resin parts from casting blocks. The Medium blade is a versatile, everyday tool for cutting styrene, resin and other materials. The Fine and Ultra-Fine blades will be ideal for those jobs where you need precsion and do not want to lose excess material.
The blades may be mounted on a separately supplied Universal Holder. Screws and nylon-cushioned bolts are included with the holder. Each blades is drilled with six holes, which means that they can be mounted in the middle of the Universal Holder or on either side. This will be very useful when you need to make very deep cuts, or on the shallow wide when you want a very stable cutting tool. The holder then simply slips into a regular hobby knife handle.
Type = Tools and Supplies
Category = Cutting Drilling and Scribing Modelling Tools
Date of Release = 2018-06-10
Status = Available