Modelcote Satin Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, mid sheen satin/eggshell finish.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satincote is usually applied as the final coat to a fully painted and decaled model.
Application
Brush or airbrush. Thin suitably when airbrushing using Enamel thinners.
Drying Time
Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.
Coverage
Dependent on application and thickness of coats.
How to Clean
Brushes: Use enamel thinners. Airbrushes:Flush through using enamel thinners.
Type = Paint, Glues and Finishing Supplies
Category = Painting Accessories
Material = Enamel
Date of Release = 2022-08-29
Status = Available