|
|
|
|
|
NOTE: Solvent based products cannot be shipped outside the Continental U.S.
|
|
 Bob Smith Industries
BSI manufactures a full line of epoxy and cyanoacrylate (CA) adhesives for hobby and industrial use. BSI's adhesives match or surpass the performance of the adhesive products from the billion dollar corporations in addition to being available locally at a fraction of the cost.
Click for the full line of Bob Smith Industries products
|
|
|
|
|
Adhesives for Resin and Metal Figures
Cyanoacrylates: Super Glues
|
|
|
|
 |
Zap-A-Gap CA+
Filling Adhesive
Excellent gap and seam filling glue for resin and metal figure kits. Allows 7 to 10 sec. for positioning, 20 sec. cure time. Also can be used on wood, rubber, plastics. Works good on oily surfaces or painted surfaces. Normal shelf life of 12 months can be extended by refrigeration.
|
|
|
|
 |
|
|
|
PAA-04 1/4 oz. Zap-A-Gap CA+ $ 3.49
PAA-03 1/2 oz. Zap-A-Gap CA+ $ 4.39
PAA-02 1 oz. Zap-A-Gap CA+ $ 7.39
PAA-01 2oz. Zap-A-Gap CA+ $ 12.99
|
|
|
|
 |
|
|
|
Zap-A-Gap CA
Filling Adhesive
Super-Thin Penetrating Formula Works great on most materials, especially balsa wood. Strengthens fiberglass cloth. Bonds in 1 to 5 seconds.
|
|
|
|
 |
|
|
|
PAA-10 1/4 oz. Zap-A-Gap CA+ $ 3.49
PAA-09 1/2 oz. Zap-A-Gap CA+ $ 4.39
PAA-08 1 oz. Zap-A-Gap CA+ $ 7.39
PAA-07 2oz. Zap-A-Gap CA+ $ 12.99
|
|
|
|
 |
|
|
Slo-Zap CA
A slow cure adhesive has a 30-40 second positioning time and cures in 1-2 minutes.
The high viscosity formula permits use on poor fitting surfaces.
PAA-20 1oz. Slo-Zap CA $ 7.59 |
|
|
|
 |
|
|
|
Zap Gel CA
This Super Glue (Cyanoacrylate) comes out of the tube as a gel and is perfect for gluing resin and metal figure kits because it goes on tacky but still allows for the final positioning of parts before setting up.
PAA-27 grams Zap Gel $ 1.59 |
|
|
|
 |
|
|
Poly Zap
A specialty CA adhesive developed for use on today's newer plastic. Ideal for Lexan – one of the more difficult plastics to bond. Poly-Zap also works with delron, polycarbonate, ABS, styrene, nylon and most acrylics. Works on many types of films and painted sufaces. Medium viscosity. Strong and flexible. Dries clear. Multi purpose formula.
PAA-22 1/2oz. Poly Zap $ 5.69
|
|
|
|
 |
|
|
|
Zip-Kicker
Accelerator for super glues forces immediate cure. Expands gap filling ability
PAA-15 2oz. Zip Kicker Pump Spray $ 6.39
PAA-50 5oz. Zip Kicker Aerosol Spray $ 8.09
PAA-29 8oz. Zip Kicker Refill for Pump Spray $ 11.49
PAA-28 2oz. Zip Kicker Foam-Safe $ 6.99 |
|
|
|
 |
|
|
Z-7 Zap Debonder
Z-7 s a water based material that softens and removes cured Cyanoacrylates, paint and hobby decals.
Safe for most plastics.
PAA-16 1oz. Z-7 Debonder $ 4.29
|
|
|
|
 |
Formula 560 Canopy Glue
The world's best canopy glue. Works on all materials, and dries clear..
Works best on:
• Metal
• Rubber
• Most Plastics
• Aluminum
• Ceramic
• China
• Wood
• Pottery
• Jewelry
PAA-56 $ 3.99
|
|
|
 |
|
|
Foam-safe Zap-O Odorless CA Glue
Zap-O is a medium thickness, slow-cure formula that is not only odor-free, but also forms strong bonds on all hobby materials, including styrofoam.
PAA-25 1oz. $ 10.99 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 83546
Butane-Powered Hot-Melt Glue Gun
Butane-Powered Hot-Melt Glue Gun Goes Anywhere -- Anytime
That's right...there's no battery to go dead and there's no cord to tangle or get in your way. It's powered by Butane fuel and is ready to go when you need it. Heats up fast and tackles the most difficult jobs. Auto-feed trigger keeps the glue flowing smoothly without hand fatigue. Includes refillable reservoir that lasts up to 2 hours on a single charge of fuel, on-board spark igniter, temperature control, folding stand and two glue sticks.
$ 39.99
|
 60909
Butane Fuel, 42 Grams
42 gram butane refill for #83546 Hot-Melt Glue Gun
$ 2.99 |
|
| Dr. Mike's Formula 2 Model-n' Crafter's CA Glue |
 MCK83424
Dr. Mike's Formula 2 Model-n' Crafter's CA Glue
Dr. Mike's Formula 2 Model-n' Crafter's CA Glue uses 'molecular integration' to form bonds between acetal* resin parts that are stronger than possible with other adhesives. The gap-filling, shock-resistant, low-odor formulation has an extended shelf life (up to one year after opening!) and also works well with traditional materials: plastic, resin, metal and wood. One small drop is all that's required for superior performance. Reaches maximum strength in 24 hours, or within seconds when used with accelerator. 1/2 fluid ounce in applicator bottle.
$ 13.99
|
|
|
|
|
| Testors |
Non-Toxic Liquid Cement
Non-toxic cement can be used on Polystyrene and ABS plastic. Cement contains a convenient precision applicator.
3527 – 1 Oz.............$ 4.49 |
Precision Cement
This glue is best used for Polystyrene and ABS plastic. Quick drying cement for plastic models joins polystyrene to polystyrene. Recommended for ages 12 and over.
8872 – 1 Oz.............$ 6.29 |
Non-toxic Cement for Plastic Models
This glue is best used for Polystyrene and ABS plastic.
Non-toxic cement for plastic models.
3523 – 5/8 Oz.............$ 1.99 |
Cement for Plastic Models
This glue is best used for Polystyrene and ABS plastic. Quick drying cement joins polystyrene to polystyrene and polystyrene to wood. For Ages 8 and Up.
3501 – 5/8 Oz.............$ 1.69
3512 – 7/8 Oz.............$ 2.19
3516 – 5/8 Oz..............$ 1.99 |
Liquid Cement for Plastic
This glue is best used for polystyrene, ABS, acetate, plexiglass and many other plastics.
Not recommended for vinyl, polyethylene, polypropylene and phenolics. For Ages 8 and Up.
3502 – 1 Oz.............$ 2.99 |
Liquid Cement for Plastic
With Precision Aplicator. This glue is best used for polystyrene, ABS, acetate, plexiglass and many other plastics.
Not recommended for vinyl, polyethylene, polypropylene and phenolics. For Ages 8 and Up.
3507C – 1 Oz.............$ 4.49
|
Plastic Model Cement Pen
Testors has added a new way of despering our glue for plastic models. As you can see it is in the form of a pen. This glue works great and you do not have the mess that sometimes comes with the tubes. For Ages 8 and Up.
3532 – 1/3 Oz.............$ 4.25
|
Model Master Instant Plastic Adhesive
Model Master Cement is a wonderful choice when needing glue. We have a wide range of glues that cover almost every gluing needs. For professional results each time, use non-crazing Clear Parts Cement & Window Maker. This glue is best used for. clear polystyrene parts like canopies, windows and windshields, and lenses to your plastic model kit.
• Will not craze plastic
• Does not yellow or leave unsightly residue
• Non-toxic, washes up with water (before it dries) if spills occur on your model. For Ages 8 and Up.
8876 – 1/2 Oz.............$ 4.19
|
Testors Cement Accelerator
with Applicator
Cures super glue instantly. Solves tough-to-bond applications. Flammable, cannot be shipped via Air. For Ages 12 and Up.
3518C – 1/4 Oz.............$ 2.99 |
Precision Gluing Tips
Precision Gluing Tips turn any glue tube into an accurate dispenser. A neat, clean bond is attainable because the tip lays down a thin, even line of cement. By using Testor Gluing Tips, the modeler can be assured of a precise job with no waste and no mess.
8805............$ 1.99
|
|
| Gunze-Sanyo |
 Mr. Cement
For Use with Polystyrene Plastics
C124
Mr Cement (25ml) $2.65
C127
Mr Cement Deluxe (40ml) $3.15
|
 MJ197
Mr. Just Brush Cement
A quick drying adhesive in a bottle. Use the brush to precisely apply points and lines. The special bottle prevents spills and eliminates worries about unintended applications. The tip does not become hard and unusable like adhesive in tubes and the aluminum storage pocket guarantees long-term preservation of the adhesive.
$ 6.99
|
|
|
|
|
Adhesive for Polystyrene Figures and Kits
|
|
|
|
 |
|
|
Plastic Weld
Plastic Solvent Cement
Use For Elastolin and Preiser Figure Repairs
Plastic Weld is a colorless, liquid plastic-fusing adhesive that dissolves a thin layer of each surface to form a welded joint as strong as the surrounding surface.
570-2 $ 3.99 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Repair Glue
|
|
|
|
 |
Gorilla Glue
The Toughest Glue on Planet Earth!
Gorilla Glue is an amazing, versatile, waterproof urethane adhesive that bonds wood, stone, metal, ceramics, styrene foam and more, even under extreme outdoor conditions. Its unique moisture-activated foaming action expands over 300 percent to fully penetrate the joint and maximize adhesion. 15-minute work time permits accurate part positioning before glue sets. When cured, Gorilla Glue sands easily without clogging sandpaper and finishes beautifully with paint and stain.
83047 $ 6.49 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot Glue Gun
One of MTSC’s recommended adhesive for ALL injection molded plastic figures including Conté Collectibles, Marx, Hat, Italeri etc.
|
|
|
|
 |
GLU-301 Electric Mini Glue Gun w/Trigger $ 4.99
GLU-310 Mini Glue Sticks (50) $ 1.99
GLU-661 Clear 2” Glue Sticks (12) $ 3.15
FPC-H270 Hi-Temperature Glue Gun w/Trigger $ 11.99 A
FPC-DT270 Dual-Temperature Glue Gun w/Trigger $ 14.99
GLU-315 Regular 4” Glue Sticks (12) $ 1.99
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White Glue (PVA)
Elmer's Glue
|
|
|
|
 |
|
|
|
ELM-375 1-1/4oz. Elmer's Glue $ 1.99
ELM-379 8oz. Elmer's Glue $ 3.29
ELM-371 16oz. Elmer's Glue $ 5.99
ELM-384 32oz. Elmer's Glue $ 8.49
ELM-395 Gallon - Elmer's Glue $ 24.99
ELM-625 1oz. Tacky Adhesive Putty $ 2.39 |
|
|
|
|
|
|
|
|
|
| Spray Adhesives |
Elmer’s
ELM-452 4oz. Spray Adhesive $ 4.49
ELM-451 11oz. Spray Adhesive $ 7.19
|
Krylon
KRY-7010 11oz. Spray Adhesive $ 7.99
KRY-7020 10.25oz. Easy-Tack
Repositionable Adhesive $ 7.99 |
|
3M Super 77
Spray Adhesive
|
| Image |
Catalog # |
Description |
Price |
    |
43770000 |
Multipurpose 16.5 oz |
$ 18.99 |
| 43770050 |
Multipurpose 10.75 oz |
$ 14.99 |
| 43771000 |
Multipurpose 7.3 oz |
$ 11.99 |
| 43772000 |
Multipurpose 4.4 oz |
$ 6.99 |
|
|
|
|
