|
|
|
Foam Products
|
| Catalog # |
Description |
Price |
| ST1406 |
1/2” Risers (4)
Use to raise track level so you can easily add low-lying areas; 1/2” risers are generally used with Incline Starters to create varying grades. 2 1/2” wide x 24” long. |
$ 5.95 |
| ST1407 |
1” Risers (4)
Use to raise track level so you can easily add low-lying areas; 1” risers are generally used with Incline Starters to create varying grades. 2 1/2” wide x 24” long. |
$ 6.95 |
| ST1408 |
2” Risers (4)
Use to raise track level so you can easily add low-lying areas. 2 1/2” wide x 24” long. |
$ 9.29 |
| ST1409 |
4” Risers (2)
Use to raise track level so you can easily add low-lying areas; 4” risers give maximum elevation for steep relief. 2 1/2” wide x 24” long. |
$ 9.29 |
| ST1410 |
2% Incline Set
Elevates track 4” in 16”. |
$ 15.95 |
| ST1411 |
4% Incline Set
Elevates track 4” in 8”. Stack the pre-cut inclines on top of risers for quick and easy elevation changes. Each piece is 2 1/2” wide x 24” long. |
$ 10.95 |
| ST1412 |
2% Incline Starter Set
Includes 8 identical pieces that raise the elevation 1/2”. Each piece is 2 1/2” wide x 24” long. Can be used alone or with sets to start your track on an incline. |
$ 5.95 |
| ST1413 |
4% Incline Starter Set
Includes 4 identical pieces that raise the elevation 1”. Each piece is 2 1/2” wide x 24” long. Can be used alone or with sets to start your track on an incline. |
$ 5.95 |
| ST1414 |
3/4” Risers (4)
Use to raise track level so you can easily add low-lying areas; 3/4” risers are generally used with Incline Starters to create varying grades. 2 1/2” wide x 24” long. |
$ 6.49 |
| ST1415 |
3% Incline Starter Set
Includes 6 identical pieces that raise the elevation 3/4”. Each piece is 2 1/2” wide x 24” long. Can be used alone or with sets to start your track on an incline. |
$ 5.95 |
| ST1416 |
3% Incline Set
Elevates track 4 1/2” in 12”. |
$ 13.95 |
| ST1419 |
8” Profile Boards
Use around the perimeter of your layout to define the contours. The special interlocking design allows them to be placed end to end, or stacked and locked together. Each profile board is 8” tall x 24” long. |
$ 7.95 |
| ST1422 |
1/4” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Can be bent to a tight radius. Each piece is 12” wide x 24” long. |
$ 3.49 |
| ST1423 |
1/2” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Can be bent to a tight radius. Each piece is 12” wide x 24” long. |
$ 3.95 |
| ST1424 |
1” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Each piece is 12” wide x 24” long. |
$ 4.79 |
| ST1425 |
2” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Each piece is 12” wide x 24” long. |
$ 7.95 |
| ST1426 |
3” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Each piece is 12” wide x 24” long. |
$ 11.95 |
| ST1427 |
4” Foam Sheet
Use foam sheets to create elevated flat areas for towns, tunnels and contour supports. Each piece is 12” wide x 24” long. |
$ 14.95 |
| ST1431 |
Foam Pencils
Foam pencils have a special lead designed to draw on foam without causing any damage. The colors will not bleed through paint or other coverings. Each package contains 2 red and 2 black pencils. |
$ 4.79 |
| ST1432 |
2” Foam Nails
Use foam nails to temporarily pin track, foam or other products to your layout. 75 nails per package. |
$ 4.95 |
| ST1433 |
Foam Knife with Blade
Foam knife comes with a 2” replaceable blade that is ideal for cutting thick pieces of foam. |
$ 6.95 |
| ST1434 |
Foam Knife Blades
Replacement blades for foam knife. |
$ 5.95 |
| ST1435 |
Hot Wire Foam Cutter
Has adjustable collars, allowing for clean accurate cuts in foam. Woodland Scenics recommends using only on SubTerrain white foam which emits no toxic fumes. Use only special Nichrome replacement wire. |
$ 39.95 |
| ST1436 |
Foam Cutter Replacement Wire
Special Nichrome wire retains an even temperature needed to cut our foam products. 4 feet long. |
$ 2.29 |
| ST1437 |
Foam Cutter Bow & Guide
The bow attachment adds versatility to the hot wire cutter. Attach the guide for precise angle cuts. |
$ 7.95 |
| ST1444 |
Foam Tack Glue
This specially formulated glue is high tack and effective on most materials, especially foam. Use as a contact cement whenever bonding two large surfaces. 12 fl. oz. |
$ 10.95 |
| ST1445 |
Low Temperature Foam Glue Gun
Operates at a temperature that will not damage foam and bonds instantly. |
$ 16.95 |
| ST1446 |
Low Temperature Foam Glue Sticks
10 10” long glue sticks. |
$ 5.95 |
